METRAPANE TRAPEZE 40

Metal roofing made of profiled colored galvanized sheet in a thickness of 0.5 to 0.6 mm. It is a trapezoid with a wave height of 40 mm and with the option of anti-condensation protection with felt on the underside.

Description

The Metrapan trapezoid 40 profiled sheet, whose main feature is exceptional load-bearing capacity at high loads, is available in a standard trapezoid design with additional reinforcements in the lower area of the sheet, which create a better aesthetic effect on the roof and additionally strengthen this area.

The covering width of the Metrapan trapezoid 40 profiled sheet is 1007 mm, and the wave height is 40 mm, which gives this sheet an exceptionally wide range of applications.

Profiled sheet metal Metrapan trapezium 40 is a flexible solution, as it can be installed on various types of sub-structures, such as concrete, steel, wood, etc. It is fixed with special screws with a neoprene pad and a rider in the upper area of the roof covering profile. We recommend professional sheet metal installation.

SKETCH:

TECHNICAL INFORMATION:

Cover width of the panel: 1,007 mm

Insulation thickness: anti-condensation felt or without anti-condensation felt

Zinc application: from 140 to 275 g/m2

Roof slope: from 4° onwards

Width: 1,032 mm

Flying: from 50 to 100 cm

Cover height: 40 mm

Wave width: 20 mm

Weight: 4.87 - 5.85 kg/m2

Download documentation

Prednosti garažnih vrat Wisniowski

Add-ons

Gutters

Kettles

Drain pipes

Edge gutters

Swan necks

Screws

SHEET THICKNESS

All roofing made from galvanized painted sheets, available in a variety of thicknesses. A larger sheet thickness ensures a higher load-bearing capacity, protection against damage and extreme weather conditions.

ZINC COATING

All roofing is made from hot-dip galvanised sheets with a zinc coating 225 g/m2 or 275 g/m2. Higher zinc coating offers a greater protection against sheet metal rusting and consequently a longer useful life.